Replacing the staple cartridge in the copier
Updated: 09/20/2017
Article #: 34
Open the cover
While pressing the lever over to the left,
slide the finisher to the left until it stops
Lower the staple case release lever and remove
the staple case. Pull the staple case out to the right
Remove the empty staple cartridge from the staple case
Insert a new staple cartridge into the staple case as shown.
Push the staple cartridge in until it clicks into place.
Replace the staple case.
Push the staple case in until it clicks into place
Slide the finisher back to the right until it
locks into its original position.
Close the cover
While pressing the lever over to the left,
slide the finisher to the left until it stops
Lower the staple case release lever and remove
the staple case. Pull the staple case out to the right
Remove the empty staple cartridge from the staple case
Insert a new staple cartridge into the staple case as shown.
Push the staple cartridge in until it clicks into place.
Replace the staple case.
Push the staple case in until it clicks into place
Slide the finisher back to the right until it
locks into its original position.
Close the cover
|
Rate this FAQ:
|
|||
|
