Making Copies Using the Bypass Tray of the Copier
Updated: 09/20/2017
Article #: 39
Place the original face up in the document feeder tray,
or face down on the document glass. After placing the
original, be sure to close to close the automatic document
feeder. If left open, parts outside the original will be copied
black, causing excessive use of the toner
Insert the paper with the print side face-down in the
bypass tray. However, if the paper is "Letter Head"
or "Pre-Printed" load the paper with the print side face up.
When loading a large sheet of paper, be sure to pull out
the bypass tray extension. Pull the bypass tray extension
all the way out. If the bypass tray extension is not pulled
all the way out, the size of the loaded paper will not be
correctly displayed.
Touch the Paper Select key
Check the paper type setting for the bypass tray.
If you need to change the settings, touch the paper
type key
Select the type of paper used in the bypass tray
Set the paper size
Auto-inch key
When the paper placed in the bypass tray is
an inch size (8-1/2" x 11", etc.), the paper size will
be detected automatically and an appropriate size
set.
Auto-AB key
When the paper inserted in the bypass tray is an AB size
(A4, etc.), the paper size will be detected automatically
and an appropriate size set.
Customize Size key
Touch this key if you wish to enter numeric values for the
size of the loaded paper
Manual key
This key can be touched to display the 16K, 16KR, and 8K keys.
Touch one of these keys if you loaded the corresponding size of paper
Touch the OK key
Select the bypass tray
Touch the paper size key of the bypass tray
Touch the OK key
Press the COLOUR START key or the BLACK & WHITE START key
Read the attached manual to learn more
or face down on the document glass. After placing the
original, be sure to close to close the automatic document
feeder. If left open, parts outside the original will be copied
black, causing excessive use of the toner
Insert the paper with the print side face-down in the
bypass tray. However, if the paper is "Letter Head"
or "Pre-Printed" load the paper with the print side face up.
When loading a large sheet of paper, be sure to pull out
the bypass tray extension. Pull the bypass tray extension
all the way out. If the bypass tray extension is not pulled
all the way out, the size of the loaded paper will not be
correctly displayed.
Touch the Paper Select key
Check the paper type setting for the bypass tray.
If you need to change the settings, touch the paper
type key
Select the type of paper used in the bypass tray
Set the paper size
Auto-inch key
When the paper placed in the bypass tray is
an inch size (8-1/2" x 11", etc.), the paper size will
be detected automatically and an appropriate size
set.
Auto-AB key
When the paper inserted in the bypass tray is an AB size
(A4, etc.), the paper size will be detected automatically
and an appropriate size set.
Customize Size key
Touch this key if you wish to enter numeric values for the
size of the loaded paper
Manual key
This key can be touched to display the 16K, 16KR, and 8K keys.
Touch one of these keys if you loaded the corresponding size of paper
Touch the OK key
Select the bypass tray
Touch the paper size key of the bypass tray
Touch the OK key
Press the COLOUR START key or the BLACK & WHITE START key
Read the attached manual to learn more
|
Rate this FAQ:
|
|||
|
